🧽 How to Clean Marble with Naturalcare Electrolyzed Solutions

✅ What You’ll Use:

• Naturalcare PowerClean (NaOH) – Degreaser (low dilution, gentle for marble)

• Naturalcare PureSan (HOCl) – Sanitizer

• Soft microfiber cloths

• Non-abrasive sponge (optional)

• Warm water

---

Step-by-Step Instructions:

Step 1: Dust & Dry Wipe

• Use a dry microfiber cloth to gently wipe off dust, crumbs, or debris.

• This prevents scratching when you clean with solution.

---

Step 2: Lightly Clean with PowerClean

• Dilute PowerClean if needed: While it’s already at a safe low concentration (0.012% NaOH), on marble we recommend applying it lightly and not letting it sit.

• Spray directly onto the microfiber cloth, NOT the marble.

• Gently wipe the surface in small sections.

• Avoid scrubbing – no abrasive pads or back-and-forth pressure.

⚠️ Note: Do NOT use PowerClean on etched or damaged marble. It may worsen the erosion.

---

Step 3: Rinse with Damp Cloth

• Take a clean, slightly damp microfiber cloth with warm water.

• Wipe down the area to remove any leftover cleaner residue.

• This helps maintain the natural finish and prevent film build-up.

💬 Pro Tips for Marble:

• No soaking or letting cleaner sit – marble is porous and can stain or dull.

• Never use acidic products like vinegar, lemon, or citrus-based cleaners.

• For spills: Blot, don’t wipe to avoid spreading the mess.

• Spot test PowerClean first if you’re unsure about the finish.